Minor wall damage such as cracks and small holes can make your property appear old and unappealing. Fortunately, with some tools and these simple steps, you can easily fix this problem.
Materials For Your Wall Repair Kit:
-
Spackle or Lightweight Wall Filler
-
Putty Knife
-
Sandpaper (medium and fine grit)
-
Concrete Wall Paint And Primer
-
Clean Cloth
Step 1: Clean the Area
Before you start, ensure the damaged area is clean. Use a damp cloth to wipe down the surface of dust and dirt, then let it dry completely. This step ensures the filler adheres properly.
Step 2: Apply Spackle or Wall Filler
For small holes and cracks, apply the spackle with a putty knife, pressing it in to fill the damaged area completely then smoothen the surface. Wipe off any extra spackle with a cloth and let it dry, usually for 1-2 hours.
Step 3: Sand the Surface
Once the filler is dry, use medium-grit sandpaper (#80–100) to smooth the area until it is level with the wall. Then use fine-grit sandpaper (#120-220) for a polished finish. Wipe away dust with a clean cloth.
Step 4: Prime and Paint
Apply a thin layer of primer to improve paint adhesion and ensure a smooth finish. Once dry, use a brush or roller to paint the repaired area and blend it with the surrounding wall for a polished look.
Step 5: Let it Dry
Let the paint dry, then inspect the repair. If needed, apply a second coat of paint to ensure a consistent color that blends with the surrounding wall.
Final Thoughts
With these simple steps, you can repair wall holes and keep your home looking its best. It’s a cheap and easy way to maintain your property without hiring a repairman.
We hope this guide was helpful! If you need more assistance, our team at Mackun Hardware is always ready to help.
Check out the DIY hardware used for this repair here:
Sandpaper
For inquiries and orders you may visit or contact us:
Address: RW Building, Sergio Osmeña Street Cagayan de Oro City, Misamis Oriental 9000
Contact No. : +63 956 037 2805