MH Articles

Whether you’re on your first day on the job or on a DIY project, power tools are a necessity. But they can be dangerous if not used correctly. Here are some advice to help you work safely and efficiently.

 

Tip #1: Pick the Right Tool for the Job

Always use power tools for their intended application. While some accessories allow them to perform tasks they weren’t designed for (such as using an angle grinder to cut wood), this should only be done for light-duty work. 

For most tasks, using the wrong tool increases the risk of accidents, tool damage, and poor work quality.

 

Tip #2: Read the Manual

Always read the user manual. Controls and features can vary between brands and models, so understanding how your power tool works is essential for safe and proper use.

 

Tip #3: Wear Personal Protective Equipment (PPE)

Power tools can be loud, create dust, and pose serious risks to your safety. Fortunately, protective gear is affordable and easy to find, so there’s no excuse not to use it. Here’s a list of PPEs you should always wear:

• Safety glasses

• Earplugs or Earmuffs

• Dust respirators

• Cut-resistant gloves

You may require more heavy-duty gear like face shields, helmets, and coveralls depending on your work environment.

 

Tip #4: Check for Damaged Parts and Test Run

Inspect your equipment before use. For electrical power tools, check for frayed cords, loose parts, or damage. For portable power tools, examine the battery for swelling or leakage. If something seems off, repair or replace the faulty part.

If everything appears fine, test the tool. If you notice unusual sounds, excessive heat, or any malfunctions, turn it off and send it to an authorized service center.

 

Tip #5: Keep Your Workspace Clean and Organized

A cluttered workspace increases the risk of accidents. Keep your tools, materials, and equipment neatly organized, and ensure the area is well-lit for optimal visibility. Always secure the material you’re working on to prevent it from shifting or causing tools to kick back unexpectedly.

 

Tip #6: Stay Focused

Avoid distractions while you’re working on the project. Concentrate fully on the task to maintain control and prevent accidents. 

Final Thoughts

By following these guidelines, you can minimize risks in the workspace. We hope this guide was helpful! If you have more questions, our team at Mackun Hardware is always ready to help.

See our selection of AEG, Powercraft, and Makita power tools here.

Check out our personal protective equipment (PPE) and their prices here.

For inquiries and orders you may visit or contact us:

Address: RW Building, Sergio Osmeña Street Cagayan de Oro City, Misamis Oriental 9000

Contact No. : +63 956 037 2805